1、 Fill industrial pump pipes
It is the abbreviation for filling industrial pump pipeline, which is a new type of construction engineering accessory product that emerged with the emergence of filling industrial pump. Its function is to deliver mine tailings to the place where they need to be poured. Its appearance greatly improves the efficiency of construction, changing the previous manual or crane bucket by bucket or bucket operation mode to quickly transport mine tailings to the place where they need to be poured, which has increased construction efficiency by nearly a hundred times.
2、 Filling industrial pump piston
The filling industrial pump piston is a filling industrial pump piston used to withstand gas pressure. There are generally two types: rubber pistons and integral pistons, which are composed of two separate pistons. Split piston, usually made of polyurethane material, but also with rubber and cloth. It consists of two pistons and two guide rings in a four piece set.
3、 Fill industrial pump glasses plate
Glasses plate, also known as wear-resistant plate, is an important component of concrete pump, named after its shape resembling glasses. It can be cut, bent, welded, etc., and can also be connected to other structures through welding, plug welding, bolt connection, and other methods. The commonly used materials for production include high chromium alloy cast iron, tungsten carbide, hard alloy, and alloy ceramics.
4、 Filling industrial pump cutting ring
The cutting ring, also known as the wear-resistant ring, is an important component of the concrete pump. It has a circular shape and is called the cutting ring because it undergoes shear motion during operation. Its function is to provide support and prevent premature damage to the main seal. The commonly used materials for production currently include high chromium alloy cast iron, tungsten carbide, hard alloy, and alloy ceramics.
一、充填工业泵泵管
  它是充填工业泵管道的简称，是随着充填工业泵泵的出现而同时出现的一种新型的建筑工程配件产品，作用是把矿山尾砂送到需要浇注的地方，它的出现大大提高了建筑施工的效率，把从前需要用人工或吊车一桶桶或一斗斗的作业方式改为了快速的将矿山尾砂输送到需要浇注的地方，使施工效率提高了近百倍。
  二、充填工业泵活塞
  充填工业泵活塞就是充填工业泵活塞，用来承受气体压力。一般有两种，橡胶活塞整体活塞，由两个分体活塞组成。分体活塞，一般是聚氨酯料，也有橡胶加布的，四件套两个活塞，两个导向环。
  三、充填工业泵眼镜板
  眼镜板又叫耐磨板，它是混凝土泵的一个重要零件，因形状像眼镜而得名。它能够进行切割、弯曲、焊接等，还可采取焊接、塞焊、螺栓连接等方式与其他结构进行连接。常用的制作材料有：高铬合金铸铁、碳化钨、硬质合金、合金陶瓷。
  四、充填工业泵切割环
  切割环又叫耐磨环，它也是混凝土泵的一个重要零件，形状像圆环状，因为工作状态做剪切运动所以称之为切割环。它的作用是起支撑作用，防止主密封过早损坏。目前常用的制作材料有：高铬合金铸铁、碳化钨、硬质合金、合金陶瓷。